Customer Support for CR Series

CR5 Controller was damaged (7)

Does the CR series have a driver file and how to drive a real robotic arm in ROS (1)

Cannot connect to CR5 via LAN, Wifi works (2)

Wobbling and shaking with CR5 (3)

Nova 5 SDK Power off status? (2)

Dobot movement Limitation (4)

CR10 Modbus RTU Communication Not Working (2)

CR5 tcpip messages to DH Gripper (1)

Gonfiguration types (1)

CR5 can't connect (1)

Problem with modbus (1)

Wobbling and vibrations on a CR5 (10)

CR5 wouldnt connect (3)

Dobot CR maximum acceleration (1)

Is it possible to set limits on the working area of the joints? (3)

About Project Seleccion in Remote Mode / Protection against modifications (1)

Failed to create socket (1)

Socket connection problem (cr5) (1)

General Backup of all programs (1)

About the "RunScript" command in TCP-IP-CR-Python. (3)

Unable to connect to CR10 on setup (10)

LED lights on end point (1)

Vision integration to CR5 (9)

Any guide for Vision Kit + CR5(DobotSCStudio)? (5)

Dobot CR5 read build in sensors data (3)

Inverse kinematics error with no solution (1)

CR3 I/O 5V and 24V I/O Ports Access (2)

I can't connect to the robot from my laptop (2)

Constant Time Outs and errors using CR3 Dobot (4)

Safe Skin & Obstacle Avoidance (2)