Constant Time Outs and errors using CR3 Dobot

#1

I’m constantly having error messeges while doing anything on the DobotStudio Pro software. It is almost unusable since the scripts cannot be saved, the general speed slider does not work, the coordinate systems changes do not apply, etc. I will attach some screenshots of the errors I get, there is always a timetout message in the end. I see there is another post reporting these issues, someone suggested disabling the Windows Firewall, but it did not work.

Hope someone can help me! Thanks a lot!

Error%20cambio%20sistema%20de%20coordenadas
Error cambio sistema de coordenadas.png468x958 40.2 KB

#2

It should be that Samba timed out when sending data while setting up the page calibration coordinate system.
Click OK and then calibrate it again to see if it works.

#3

If you can, please open the robot project folder and send the tool. json and users. Json. There may be a problem with these two files, resulting in abnormal robot connection

#4

Changed the PC and it seems to be working with the older software, thanks for your reply!