Customer Support for MG400


Stopping movement using IO (2)
Synchronize Script to DAQ Measurements (5)
MG400 EnableRobot() command (4)
Dobot mg400 stuck on tcpstart (2)
Request for DH Parameters for MG400 Robot (2)
TCP connection between MG400 and Arduino H7 with Arduine vision shield (4)
Blockly Palletizing (1)
Manual for Grippers (1)
Your advice on "remote" robot operation and Arduino interfacing (2)
MG400 - ModBUS InMotion flag (1)
TCP-IP Python API robot feedback is not working properly (10)
Start Blockly program after Power on (3)
Resume after collision (1)
Dobot Studio Pro searching and connection issue (1)
DobotStudio Pro 2.6.0 does not save my Blockly program (2)
Mini electromagnetic gripper activation for mg400 (2)
600,000+ arm movements and motor 4 now has error (1)
Exter Axis status is not ready! (1)
Multiple robots control via single PC (11)
MG400 - detect when hand-teach button is pressed (1)
Move Point in Vision Studio with MG400 not working (1)
Dobot MG400 - losing the Initial Pose settings (1)
MG400, Help needed (5)
MOVLIO TCP-IP Python does not update for speed (1)
How to jog (smooth motion) in Blocky or Lua? (4)
MG 400 Joint 4 Buzzing (14)
Conection Error (1)
Pull Script Points from MG400 Remotely (2)
How to connect to MG400 through apple MacBook? (2)
Palett and Vision missing in DobotBlocky in DobotStudio Pro 2.4.1 (3)