I’m using it by connecting Dobot as below.
MG400 does not automatically discover, and it works normally when the main LAN port on the PC is changed to ‘Disabled’ and only the Dobot LAN port is left alive.
The Dobot studio Pro seems to detect the robot only through the main LAN port.
In Dobot SC Studio, the MG400 was automatically discovered and even connected.
Please reply after checking the issue.
PC <> Mainboard LAN Port (set IP, subnet mask, Gateway, DNS) <> Internet.
└─ <> USB to LAN Converter(Ugreen prod.) <> LAN (set IP, subnet mask) <> DOBOT MG 400 LAN 1 Port
(I’m leaving a text message because I couldn’t attach a picture due to company security issues.)