Customer Support for CR Series

About the Customer Support for CR Series category (2)

DobotStudio Pro - Windows Virtual Controller (1)

Dobot CR10 URDF (3)

CR5 trajectory file (1)

CR5/CR10 restart after user emergency via modbus (1)

Siemens1200 gateway CR7 (1)

I need CR5&CR3 Firmware (3)

DobotStudio Pro vs DobotSCStudio (3)

CR10A Firmware update (1)

CR5 not fully completing move instruction (5)

Missing block when editing a subroutine in Blockly (3)

No connection after firmware update (1)

Dobot CR5 detected, but error pops up when connecting (1)

Trouble Connecting to CR5 in DobotStudio Pro or CRStudio App (14)

How can I do this? (1)

CR5 Factory permission (1)

What is the reaction force on CR10 and CR16 to connect a Bolt Torquing Tool (1)

Collision detected when moving Joint 2 (1)

CR5 Controller not starting up after flash firmware (1)

Dobot CR5 with RoboDK (8)

CR10 Will Not Connect (2)

Converting string to number (1)

Modification of Global Variable data using TCP/IP (1)

C# how to make a plugin which send data to the robot received from a camera via tcp/ip Laptop (1)

TCP/IP communication failed due to windows error [WinError 10053] (1)

Suggestion for Dobot CR communication to PLC or HMI (4)

CR5 Controller was damaged (7)

Does the CR series have a driver file and how to drive a real robotic arm in ROS (1)

Cannot connect to CR5 via LAN, Wifi works (2)

Wobbling and shaking with CR5 (3)