Customer support for Magician


About the Customer support for Magician category (4)
Infrared Sensor / Photo Electric Sensor - Not executing stop function (1)
Suctioncup is blowing air out (8)
Failed to Execute Script Error (14)
EndEffector Parameters (1)
Dobot DLL for laser engraving (1)
在发送PTP指令后发送SetEMotorS会导致机械臂移动 (1)
请问Magician的默认参数是否能提供? (1)
Joint3 angle depends on joint2 angle? (2)
Control Stepper 1 from C# (2)
Need help with Gripper (2)
Link to CAD Models (15)
Can Magician Gripper pivot to be horizontal? (2)
How to manipulate gripper in Blockly (1)
Newbie, problem with Joint 4 (3)
I need a URDF file for Dobot1 to do simulation in ROS ( 2 3 ) (48)
Need help running python script on linux (arch 64 bit) (9)
Cannot start the conveyor (2)
CAD model of Dobot conveyor (5)
5V circuit looks broken (1)
Need to flip the arm (1)
Suction cup only blows air and does not suck after firmware 3.6.10 (3)
Dobot Studio in MacOS Catalina - 10.15.1 (8)
The X, Y changes after home cmd (1)
URDF file and the ROS example share? (2)
ROS 2 Compatibility (5)
DobotClient_JOG not Moving Robot (3)
dType.SetEndEffectorSuctionCup does not work as per Spec (5)
Dobot Python Demo Not Working (6)
Dobotvisionstudio lauch failed (1)