General Discourse

Control of extra servos in Dobot Studio (6)
Colision and specification for CR3 (4)
Rigiet Panorama and Tracking function not working on iOS (2)
Dobotvisionstudio error (3)
Mooz 3 - extruder heating element not working (2)
How to use Hikvision camera in conveyer tracking with MG400? (2)
I too am getting the same problem - “Lauch Failed” Dongle not detected or errorcode" Please send to (2)
Arduino uno in case of Mega (2)
Help needed for DOBOT Arm v1.0 - all download links are invalid! (1)
3D printing on MOOZ-3 the print head hits the hot bed directly (1)
Lua Script to control Dobot MG400 (4)
Dobot Magician taking pause when moving between two points ( 2 3 ) (43)
Hikvision usb3 Camera MV-CE050-30UC and Python+OpenCV (8)
Dobot Studio 2020 MG400 how to delete unwanted scripts (3)
Dobot Lite works, but Magic Box asks for "file restore"? (2)
Vision JHSM300F driver (18)
usbVideo.exe file Missing (2)
Magician Lite - Magic box beeping no screen (2)
Videos in Download Center (1)
Cannot connect usb3 camera (hikvision) in Vision kit on linux (2)
How to buy robot CR5 in Vietnam (2)
Fix printer error code 0x97 (5)
Replace the RJ45 crystal head of the MOOZ function module cable (1)
The problem of unpredictable trajectory when drawing arcs in Teaching&Playback (1)
The Magician indicator is always green even after shutting down (1)
Dobot overheating (1)
AI-Starter white balance calibration (1)
Magician indicator is off (neither red nor green) and serial port is not connected (1)
The Cura “Printhead Settings” problem of MOOZ-2 and MOOZ-3 3D printer (3)
Technical manual about the color sensor of conveyor belt (1)