Customer Support for DOBOT MOOZ

MOOZ Y axis stuttering and wont move (1)

Dobot Mooz 2 under Linux Mint 19 with Simplify3D 4.1/CURA 3.5.1 (1)

Sensors near print head (2)

Mooz 3 still useless (nozzle now won't heat) (2)

Need new mainboard - mooz2 (2)

Warning - don't feed the trolls (1)

I think I need a new extruder stepper motor (4)

Mooz2 just extrudes and does not print on the bed (2)

Print area for mooz 3 (2)

LAN port of main board was chipped (1)

Upgrading to Cura 3.3.0 (5)

After-print best practices (6)

Ultimaker Cura 3.4.1 (1)

Modules or main board doesn't work Mooz2 (9)

How often does print head get jammed and need to be taken apart? (4)

Astroprint support (5)

Heated Bed Not Getting Hot Enough (2)

Unit keeps shutting down (2)

How do you check the firmware version installed on the Mooz (2)

Catastrophic Z / Bed Destruction still happens in 1.4.5 (3)

I need a new heatbed for my Mooz 2 (6)

Testing a Hardened Steel nozzle (3)

Just had my MOOZ 1 x axis fail (3)

Can this material be used? (1)

Unsuccessful first print, no filament extruding during print, clicking (7)

Noozle replacement, what type to use? (10)

Problem with ready to print vase (1)

How to clean a clogged nozzle? (5)

Z axis not responding during bed leveling...MOOZ 1 (5)

DOBOT MOOZ Video Tutorials for MOOZ-1/MOOZ-2 (2)