DOBOT MOOZ Video Tutorials for MOOZ-1/MOOZ-2

#1

Dear Backers,

Here we would like to share the latest video tutorials for MOOZ-1/MOOZ-2, which takes over one month to complete, 15 videos in total>>
Here is the topic list:

  1. [DOBOT MOOZ Tutorial] How to Test Whole Machine

  2. [DOBOT MOOZ Tutorial] Troubleshooting: Nozzle Temperature Displays Failure, Printer Keeps Rebooting

  3. [DOBOT MOOZ Tutorial] Troubleshooting: Unable to Print in the Center of Heating Bed

  4. [DOBOT MOOZ Tutorial] Troubleshooting Jamming Clogging 3D Printing Head

  5. [DOBOT MOOZ Tutorial]How to Set the Zero Point

  6. [DOBOT MOOZ Tutorial] How to Assemble MOOZ-2

  7. [DOBOT MOOZ Tutorial] How to Assemble MOOZ-1

  8. [DOBOT MOOZ Tutorial] How to Upgrade Mainboard and LCD Touchpad Firmware

  9. [DOBOT MOOZ Tutorial] How to Laser Engrave

  10. [DOBOT MOOZ Tutorial]How to Install Cura and Set up Configuration

  11. [DOBOT MOOZ Tutorial]How to Install and Uninstall Filament

  12. [DOBOT MOOZ Tutorial] How to CNC

  13. [DOBOT MOOZ Tutorial] How to Operate Three-Point Calibration

  14. [DOBOT MOOZ Tutorial] How to 3D Print from PC

  15. [DOBOT MOOZ Tutorial]How to 3D Print Directly from SD Card or U Driver

NOTE:

  1. For MOOZ-3, we will release exclusive video tutorials for MOOZ-3 later, which will be released on our Facebook or YouTube Channel

  2. Please contact our aftersales team if those video tutorials didn’t solve your problem via mooz@dobot.cc

  3. If you still have more suggestions about video tutorials, welcome to leave comment in this forum post.

Sincerely,

MOOZ Team

#2

Wow - these will be a great resource. Thanks! Haven’t watched, but I hope they’ll be very useful for the community. Thanks!