Magician indicator is off (neither red nor green) and serial port is not connected


The Magician’s status indicator does not light up, neither shows red nor green. And when open the DobotStudio software trying to connect the robotic arm, it prompts that the current serial port is not connected to Dobot, please select the correct port.

When encountering this situation, users need to re-burn the firmware for the Magician.
Please use the Mcuisp tool and the firmware in the folder (path DobotStudio > config > firmware)
Just open the Mcuisp application directly in the folder after decompression.
Mcuisp tool