Magician connection issue "The current serial port is not connected to Dobot, ..."


#1

After the Magician is turned on, the signal light does not light up. After clicking connect in DobotStudio, a pop-up prompt “The current serial port is not connected to Dobot, please select the correct port”, cannot connect to the robotic arm.
The Magician needs to re-burn the firmware when encountering this situation, please use the Mcuisp tool to burn the firmware manually. Obtain the Mcuisp tool: DobotStudio/Tools/Mcuisp or download it from the link below. https://drive.google.com/file/d/1ph4DuTSqjrZhoy_SP6Sdv1lGkxnXcMho/view?usp=sharing
image