Customer Support for DOBOT MOOZ

3D printing finish abnormally (2)
Z - zero impression in the air (6)
MOOZ Y axis stuttering and wont move (1)
Dobot Mooz 2 under Linux Mint 19 with Simplify3D 4.1/CURA 3.5.1 (1)
Bed Leveling. I need 15 characters for title which is very stupid (1)
Sensors near print head (2)
Mooz 3 still useless (nozzle now won't heat) (2)
Need new mainboard - mooz2 (2)
Warning - don't feed the trolls (1)
I think I need a new extruder stepper motor (4)
Mooz2 just extrudes and does not print on the bed (2)
iPad air charging issue (1)
Print area for mooz 3 (2)
Heated bead issues (17)
How to generate gcode from vector? (7)
LAN port of main board was chipped (1)
Upgrading to Cura 3.3.0 (5)
After-print best practices (6)
Ultimaker Cura 3.4.1 (1)
Help for new installation mooz 2 (10)
Instructable for Laser Engraving with Mooz 2 (1)
Modules or main board doesn't work Mooz2 (9)
How often does print head get jammed and need to be taken apart? (4)
Astroprint support (5)
Heated Bed Not Getting Hot Enough (2)
Unit keeps shutting down (2)
How do you check the firmware version installed on the Mooz (2)
Catastrophic Z / Bed Destruction still happens in 1.4.5 (3)
I need a new heatbed for my Mooz 2 (6)
Testing a Hardened Steel nozzle (3)