Mooz-2 Wifi won’t boot up - stuck on screen. Printer recently stop booting at all - only screen lit up. Works fine many days, many good prints was made.
Here is link video: mooz issue
Please can someone help me?
Mooz-2 Wifi won't boot - stuck on screen
Ryan_Yin
#2
Hi Pawel, for this issue, you can try to update the firmware of MOOZ-2(WiFi) mainboard and touchpad (update both firmwares). Download the firmwares of MOOZ-2 (WiFi version)
https://www.dobot.cc/downloadcenter/dobot-mooz.html?sub_cat=204#sub-download]
Please note: The SD card must be FAT32 format, and the memory can not be larger than 32G.
And it is best to clear the SD card memory first, and then download the touchpad firmware.
How to Upgrade Mainboard and LCD Touchpad Firmware https://www.youtube.com/watch?v=d3E5tupnOO0&list=PL45kRIwqe_-1cNDgg1zWboQkgRb96oHzN&index=9&t=0s