DOBOT Turns on but no indicator light


#1

Hi,

My DOBOT was working well until it failed to connect to the software. I turned it off and when I turned it back on, no indicator light came on.


求助!!DobotMagician连接不上了
Dobot Magician V3.7.0 Broke Dobot. Bricked, status LED not working Dobot Not working
#2

Try reloading the firmware: Setting→Firmware→Dobot Firmware;
If the ways above are all failed, please close Dobot Studio, and then reload the firmware manually: Tools→Mcuisp
image
Open Mcuisp.exe, find the Dobot.hex firmware in “firmware” floder, and click Start Isp to load firmware:
image
image
After finishing loading firmware, wait a moment, and the buzz will ring if loading firmware successfully. Dobot will be connected properly. If it fails to load firmware, the serial parts of mainboard must be malfunction, please contact support@dobot.cc .


Dobot magician led turn off
#3

thanks…i too had the same problem, this helped


LED is off when Magician turned on
Dobot failing to turn on> please help
Update firmware says unknown, light on dobot is red
Various issues with Dobot
#4

I found that if you are on Win10 64, the version of Mcuisp.exe in the latest download doesn’t work.

To get past this

  • Download the zip file for the “XP” version of Dobotstudio
  • Unzip the file and it explodes into a folder
  • Navigate in the unzipped folders to the XP version of Mcuisp.exe and execute this version instead
  • Using the XP version of Mcuisp.exe, use the latest version of Dobot.hex and update the firmware
  • After few minutes, the status LED will light OK